Products available include Insulated Terminals, Cable Glands, Copper Lugs & Ferrules, Power Products, PVC Insulation Tape, Cable Crimping and Hand Tools, Heatshrink, Hospital Saddles, Cable Ties and General Cable Management products.
Based in Rose Hill, Mauritius we are centrally positioned to provide over 2000 Electrical Products and Accessories to Electrical Wholesalers, Contractors, OEM’s and Panel Manufacturers.
Industry: Electrical/Import
Company Size: 5-10 Employees
Headquarters: Rose Hill, Mauritius
Service Area: Mauritius
Address: Wellington St, Beau Bassin-Rose Hill, Mauritius.
Hours: Monday-Friday 8am-4pm
Email: sales@carlmit.com
Website: www.carlmit.com
Company Registration: C104618
Further details including detailed Product Catalogues can be found via our company website, http://www.carlmit.com
Copper Lugs and Ferrules are made from 99.9%+ cu IACS high conductivity copper. These Copper Lugs and Ferrules are oxygen free and capable of withstanding a continuous operating temperature of 155°C.
XLPE Heavy Duty Copper Lugs and Ferrules are specifically manufactured for use on compacted XLPE Copper cable.
Aluminum Lugs and Ferrules are available in Four Core or Round.
-CA2 Nickel plated Brass Cables Glands can be used indoors or outdoors, on all “unarmoured” cable.
–CBWLE Loose Cone Economy Brass Cable Glands have high quality Nickel plating. As a cost effective solution, these glands may be used indoors or outdoors, to provide clamping of the armouring, ensuring earth continuity, and to provide mechanical retention of the cable.
–CBWR Rotary Cone Brass Cable Glands may be used indoors or outdoors, to provide clamping of the armouring, ensuring earth continuity, and to provide mechanical retention of the cable.
Heatshrink can be used for various projects and is available in Medium Wall, XLP Thin Wall, XDW Thin Wall and Cross-Linked Polyolefin Wrap Around.
Both Tubing Selection and Tubing Range Charts are available via our company website.
We offer a vast range of Pre-Insulated Terminals for various applications; all terminals should be crimped onto the conductor using a Carmit crimper or any quality crimper that is designed to crimp the specific terminal type.
Bootlace Ferrules are used to terminate conductors, by containing the strands in a thin walled copper sleeve that is crimped onto the conductor. The sleeve stops screws in the terminal from breaking strands.
The Twin Wire BLFT range is specifically designed to terminate two wires in the same terminal. With the development of smaller switches and devices, housing have become smaller. The twin wire BLFT solves these problems in a quick and easy way.
Un-insulated Bootlace Pins are used to terminate conductors, by containing the strands in a thin walled copper sleeve. Crimping of the sleeves is optional, since the screw in the terminal will “crimp” the connection.
Cable Ties, manufactured from nylon: One-piece, injection molded construction provides maximum strength and adjustability for securing all sizes of bundles. Extra features such as rounded edges and bent-tip design make installation easy, fast, accurate and secure. Cable tie installation tools are not required but are suggested where controlled, uniform tension and cut-off applications are desired.
Stainless Steel Cable Ties are a quick, effective way of securing cables that are in a hostile environment. They have a unique ball bearing locking mechanism that allows the tie to be quickly and easily installed, but not undone. They install much quicker than traditional strapping systems. The heavy-duty ties have an offset tip to speed insertion on the tie. The ties are made from 316, non-magnetic stainless steel. Ties are packed in sturdy cardboard boxes. Typical uses are flameproof installations, the chemical industry and long-term external exposure.
Braided Sleeving is an expandable flexible harness, manufactured from monofilament polyester. It’s main characteristic consists in the construction of the braiding which allows the product to increase its interior diameter considerably and at the same time contracting in length.
Spiral Binding is designed to wrap around bundles of wires to make neat looms and protect the conductors. Each Spiral Binding type accommodates a large range of diameters and allows breakouts at any point. We offer two grades: natural for indoor use and black for UV resistant outdoor use. It is quick and easy to apply.
Flexible Rubber Grommets, for protecting wires from sharp corners in panel and chassis holes.
“P” Clips provide an economical and secure way to mount cables and looms to just about anything. The cable, loom etc. is simply slipped into the clip and then the clip can be screwed or bolted to walls, cabinets etc.
Flexible Grommet protects cables against sharp edges and abrasion on panel holes. It is supplied in 2m rolls and can be cut to length. It snaps into place and fits circular or irregular shapes.
The SAM ranges of Stick-On Mounting Bases are low profile and 4-way bases that stick onto virtually any surface. Simply peel the backing paper and stick onto any clean, dry, smooth, non-greasy surface. Standard and light duty ties insert and secure easily for all types of bundling needs. These stick-on mounts are not recommended for outdoor use.
Nylon Plugs can snap into holes of a panel or chassis 0.8 to 3.2mm thick.
Strain Relief Bushings are designed to clamp around a cord and then are inserted into a straight-sided panel hole.
PVC Insulation Tape is resistant to acid, alkali, solvents, cold, and is flame retardant. This tape can be used for basic insulation, as well as harnessing and general wire wrapping. The tape is supplied in rolls of 10.
Hospital Saddles are available in Standard Duty, Heavy Duty, Plain Galvanized and Heavy Duty Galvanized.
Bosal End Caps, also known as Knock on Bushes, are also available from 20MM to 50MM.
Stockists of Cable Crimping and Hand Tools, Hand Cutters, Heat Guns, Hydraulic Crimping Tools and Pumps, Pliers and Side Cutters, Screwdrivers.
Cable Stockings are the most common type of stockings, used for general cable hauling. They have a single eye and are integrally woven on a central axis. The stockings are slipped over the end of the cable, and grip when pulled. They are made of two-ply, galvanized steel wire strand with an alloy ferrule and soft eye.
Hole Cutters are designed for long life and allow fast cutting of accurately sized holes in metal, steel and plastic. They can be used with a hand drill or press mounted drill and can cut a precision hole. They come complete with arbor and pilot drill, individually packed in a merchandiser pack.